How to grow and care for snake plant (sansevieria trifasciata)

Share

Learn how to keep your snake plant (or you may also refer it as sansevieria trifasciata or mother in law’s tongue plant) looking sharp and lush all year round at home. Here’s a comprehensive guide to snake plant benefits, snake plant care, and how to grow and care for it. 

Stylish green plants in pots plant nurseries in kl

The next big thing in instagrammable houseplants – the humble snake plant! ©sonjachnyj | 123rf

*This article was updated on 14th December 2020.

A common and extremely lovable indoor plant, the snake plant (scientific name: Dracaena trifasciata), also known as the  sansevieria trifasciata or mother in law’s tongue (for its sharp leaves) is one of the latest trends for millennial house plant enthusiasts.

Aside from its distinctively unique architecture, it is also a very tough and tolerant plant with a straightforward, easy to grow routine and is not the slightest bit fussy. You don’t even need a green thumb for this. Its sword-like leaves are smooth and stiff, so much so that it is known as ‘bowstring hemp’ in countries where its tough fibres were once used to make bowstrings.

It also comes in 70 unique varieties and the snake plant is said to have air pollutant filtering qualities that are great for improving indoor air by absorbing absorb benzene, formaldehyde, xylene, and toluene.

In fact, the snake plant is an ideal bedroom plant. We know that most plants release carbon dioxide at night, but the Sansevieria continue to produce oxygen at night. This plant has also been used to cure Sick Building Syndrome, thanks to its constant supply of oxygen. It is no wonder why it’s become a favourite amongst both novice and long-time houseplant owners.

However, do note that it is mildly toxic and should be kept away from curious children and pets.

Despite being a tolerant plant, it is still essential to give it the best care possible to ensure your snake plant grows and stays healthy for many years.

What are the benefits of having a snake plant at home? 

  1. This plant can help filter indoor air so that you can breathe in fresh air all day and night.
  2. Snake plants are also known to help remove toxic air pollutants, including formaldehyde, carbon dioxide, benzene, xylene, and toluene.
  3. A theoretical report published at Harvard University concluded that the Sansevieria is one of the indoor plants that give out the most oxygen as compared to the other houseplants.
  4. Another study done by NASA also shown that this plant is one of the best natural air purifiers out there.

How many types of sansevieria or snake plants out there?

To answer simply, it really depends on what your preference is. The most common snake plant variety is the sansevieria trifasciata, which are mainly green-yellow leaves but have cultivars with different colours or even curly leaves. Another popular one is the sansevieria cylindrica which has fat, rounded leaves that can reach up to 6 feet tall. Or what about the sansevieria masoniana, also known as the whale’s fin as it has broad, paddle-shaped leaves that grow up to four feet in length. Take a trip to your local nursery and you may find some interesting varieties in colours like moonshine, golden hahnii, and so on.

Read more: How to grow and care for aloe vera plants

What is the best pot and potting soil to use for the Viper’s bowstring hemp?

snake plant

Always water sparingly, snake plants can thrive on neglect © Kristijan Aranjos | 123rf

They do best in clay/terracotta pots with drained holes to keep soil dry as quickly as compared to plastic pots. And do ensure that the pots have drainage holes. The plants enjoy a drier environment so a quick-draining soil, like the ones used for cacti/succulents, would work best.

How often should I water sansevieria trifasciata? 

Overwatering is a common problem when it comes to these indoor plants as they detest soggy soil. However, it’s great news for those looking for minimal maintenance houseplant. Water it thoroughly every 10-14 days. Depending on the airflow in your environment, you can determine how dry the soil is by sticking your finger or a chopstick about a few inches deep. That will determine the amount of water needed and how often. It is also best to water from the bottom, by placing the pot in a bowl of water for 30 minutes until it has absorbed enough water. This encourages the roots to grow downwards, therefore, further stabilising the plant.

How much sun does a snake plant need? 

Despite snake plants being lauded for withstanding full sun and handle low-light conditions, that’s just a quicker way to shorten its lifespan. Find a place with bright, indirect sunlight conditions – a kitchen windowsill, by the balcony sliding door or even up on a living room shelf. These flowering plants are also known to produce various coloured flowers in optimum settings. Keep it in a nice, warm area without any direct air drafts and your plant should be happily settled. Do note that most mother in law’s tongue have large green leaves that collect dust and would require wiping down with a damp cloth once in a while.

Does the mother in law’s tongue need fertiliser? 

Remember how we said that they are not fussy? It’s true because snake plants don’t require any fertilisation at all if you prefer not to, but this would mean that they would stay relatively the same way for quite some time. Therefore, if you’re looking to grow your plant larger or have a more lush pot, then applying any basic plant fertiliser once a month would be good enough. If you use slow-release fertilisers (comes in the form of little round balls), then you may only need to apply it once every 2-3 months as these fertilisers will take some time to degrade.

Read more: 16 easy care indoor plants you can’t kill (so easily)

How to propagate sansevieria trifasciata?

snake plant

Treat them well, and they can last for many years to come © piksel | 123rf

Of course! Snake plants grow from rhizomes that are underground and the easiest way is to divide the plant to get more plants. If you’re propagating by division, you will need to dig the entire plant out to ensure the divisions each have a good amount of root and rhizome attached. Another way is through cutting at the rhizome stem without having to dig out the entire plant. Cut the whitish-grey rhizome stem which has a few leaves attached with a sharp knife. Let the cut ‘heal’ and dry out for 24 hours before putting it into the soil.

Lastly, it is also possible to propagate via leaf cuttings. Do note that it’s not as easy to be successful with this method compared to the first two mentioned above. But if you’re game to try, grab a nice and healthy leaf about 6 inches long. Cut the leaf into two equal parts, horizontally – and remember which side of the leaf is facing up and which is rootside down. Leave them out for the cut areas to dry and heal. Then, place the cuttings rootside down into damp soil and keep to your regular watering schedule. The green leaves will stop growing but instead, a new leaf ‘pup’ will emerge at the side of each, giving you a fresh new plant.

Read more: How to grow succulents in 3 quick steps

Why is my plant dying?

  1. Root rot issues

When it comes to sansevieria, there is only ever one main issue as mentioned above – overwatering. If you ever notice your plant going limp, turning yellow or becoming mushy, it is a sign of root rot caused by the soil being too waterlogged and the roots unable to breathe. In this case, you need to take it out of the pot to assess the damage to the roots. Remove the mushy/black root parts and pot it into fresh, well-draining soil. Let it sit for a few days before watering it sparingly, and in no time, your snake plant will be back on its feet!

  1. Pests like mealybugs or spider mites

The second reason for a dying sansevieria is pests. These two pests are the bane of all houseplant lovers. They sneak in quietly and can end up decimating an entire array of plants in one swift swoop. Mealybugs are cottony and white, so they are pretty easy to spot on your dark green snake plants. Spider mites, on the other hand, are much, much tinier and are usually only known when there are tiny webs all over the plant, signalling an infestation. 

These pests can cause stunted growth or yellowing in plants (further confusing you making you think you may have overwatered it) if not treated. They destroy plants by sucking on the leaf/stem’s juices while laying eggs and producing sweet nectar that attracts ants. Ants work to protect these pests in return for the nectar, so seeing ants around your plant is a sure sign of pest infestations. In this case, treatment requires some constant wiping down with diluted rubbing alcohol and a blast of insecticidal soap. It may take about 2 weeks of waging wars before you can finally rid yourself of them, so be vigilant and check your plant weekly.

We hope you enjoyed this guide and that you will be inspired to start your snake plant (or sansevieria trifasciata, dracaena trifasciata, mother in law’s tongue, viper’s bowstring hemp) collection. Remember, although they are low maintenance and virtually indestructible, they would still require a little snake plant care from time to time.

If you’re looking to grow other indoor plants like zz plants, peace lilies and spider plants, click here to find out how.


Share
Sign up and stay updated
Get the latest property news, home solution tips, interior design ideas and property guides.
By subscribing, you consent to receive direct marketing from iProperty.com Malaysia Sdn Bhd (iProperty), its group of companies and partners. You also accept iProperty’s Terms of Use and Privacy Policy including its collection, use, disclosure, processing, storage and handling of your personal information.